Toro Electrical & Ignition
Toro electrical parts and ignition components power starting systems and engine operation across walk-behind, zero-turn, and commercial equipment. Our electrical inventory includes Toro mower electrical parts, ignition parts, and complete electrical spares for TimeCutter, Recycler, Z Master, and GrandStand models. Toro Spares holds comprehensive Toro ignition components in stock including batteries, coils, switches, regulators, solenoids, and starter motors, with worldwide shipping on all electrical orders. Whether diagnosing no-start conditions or addressing charging system failures, our range covers essential electrical parts that ensure reliable engine starting and battery maintenance throughout residential and commercial mowing applications.
Available Toro Electrical & Ignition
Toro Starter Motor
136-7880
Toro
£199.05
Available
Solenoid
106-8245
Toro
£87.65
In Stock
Starter Solenoid
28-4210
Toro
£61.56
In Stock
Solenoid
MU7701100
Toro
£31.71
In Stock
Solenoid
740207
Toro
£30.93
In Stock
Solenoid
117-1197
Toro
£44.34
In Stock
Solenoid Kit
127-9292
Toro
£43.31
Available
Ignition Switch
137-4100
Toro
£25.78
In Stock
Ignition Switch Assembly
103991
Toro
£44.35
In Stock
Ignition Switch
92-6785
Toro
£74.25
In Stock
Ignition Switch
23-0660
Toro
£21.66
In Stock
Ignition Switch Assembly
103990
Toro
£27.84
Available
Frequently Asked Questions
How do I test Toro electrical components?
Use a multimeter to test battery voltage, check ignition coil resistance, verify solenoid clicking and voltage output, and measure charging system voltage (should be 13.5-14.5V when running). Always disconnect kill wires when testing ignition components to eliminate grounding issues.
What causes repeated blown fuses in Toro mowers?
Blown fuses typically indicate short circuits in wiring harnesses, faulty voltage regulators, damaged alternator stators, or defective safety switches creating unwanted ground paths. Trace wiring from fuse to components checking for damaged insulation or pinched wires.
Why does my Toro click but won't turn over?
Clicking without engine turnover usually indicates insufficient battery power, corroded cable connections, or faulty solenoid contacts. Fully charge or replace the battery, clean all terminals, then test solenoid by jumping terminals to verify starter motor operation.
Can safety switches prevent Toro mowers from starting?
Yes, faulty seat switches, brake switches, or PTO switches can prevent starting even with good electrical components. These safety interlocks must show proper continuity when engaged; test each switch individually with a multimeter to identify failures.
Why won't my Toro mower start electrically?
Common electrical no-start causes include dead or weak batteries, faulty starter solenoids producing clicking sounds, bad ignition switches, or blown fuses. Check battery voltage first (should read 12.6V), then inspect fuses and connections before testing solenoid and starter components.