Toro Throttle Cables
Toro throttle cables control engine speed and choke operation across walk-behind and zero-turn equipment types. Our throttle cable inventory includes Toro throttle cables, mower throttle cables, engine throttle cables, replacement throttle cables, and speed control cables. Toro Spares stocks Toro speed control cable assemblies in stock with correct cable lengths and end fittings for Briggs & Stratton, Kohler, and Kawasaki engines, providing worldwide shipping on all throttle cable orders. These essential engine throttle cable components feature braided steel construction with protective housings that resist corrosion whilst maintaining smooth throttle operation throughout varying engine speeds and environmental conditions during mowing operations.
Available Toro Throttle Cables
Throttle Cable
88-4350
Toro
£23.71
In Stock
Throttle Cable
119-8248
Toro
£18.55
In Stock
Throttle Cable
100-2839
Toro
£39.18
View More
Throttle Control
88-4340
Toro
£34.03
In Stock
Throttle Control With Opc Asm
111-2205
Toro
£34.82
In Stock
Brake Cable
132-4533
Toro
£17.52
In Stock
Cable Spring
88-6420
Toro
£39.07
In Stock
Cable Variator
134-2552
Toro
£41.91
In Stock
Traction Cable
100-3936
Toro
£34.03
In Stock
Clutch Cable
134-0240
Toro
£9.79
In Stock
Cable Guide
410037
Toro
£1.33
In Stock
Traction Cable
110-9162
Toro
£30.93
In Stock
Frequently Asked Questions
Can I adjust Toro throttle cable tension?
Adjust throttle cable tension by loosening cable clamp screw at carburettor, pulling cable taut with throttle lever in fast position ensuring full carburetor opening, then retightening clamp screw maintaining adjustment.
What causes Toro throttle cables to fail?
Throttle cable failure results from corrosion inside housing preventing movement, fraying from repeated flexing at tight bends, improper routing creating sharp angles, or lack of lubrication. Route cables with gentle curves preventing premature failure.
Why won't my Toro reach full throttle?
Throttle not reaching full speed indicates stretched cable requiring adjustment, binding cable housing restricting travel, improper cable routing creating tension, or carburetor linkage damage. Adjust cable tension eliminating slack first.
How often should throttle cables be replaced?
Replace throttle cables when fraying appears at ends, excessive stiffness prevents smooth operation, stretching exceeds adjustment range, or housing damage occurs. Typical cable life spans 3-5 years with proper maintenance and storage.
How do I adjust a sticking Toro throttle cable?
Lubricate sticking throttle cables by disconnecting at carburetor, pulling inner cable whilst spraying penetrating oil into housing, working cable back and forth, then reconnecting. Severely corroded cables require replacement rather than lubrication.